These are our basic models that were designed for small companies that don’t need expensive high speed machines and don’t want to spend a fortune to automate. These machines feature:
- Digital control that is very user friendly.
- Variable speed motor with feed rate of 5-22 inches per second.
- Cut time is variable to allow for maximum production.
Maximum length is 50 feet and the length tolerance is 3/16 of an inch per 60 inches (depending on material). Two different knife widths are available 4 1/2’’ or 7’’.
Power requirements are 110V, Minimum 50# of air pressure (depending on material) and a table to set it on. TRC Industries can customize machines to operate on different power for use in countries other than the USA. Contact use if you need customization.
TRC 1000 CS Dimensions are 14’’ x 7’’ x 14’’ for the cutter, 6’’ x8’’ x 12’’ for the roll stand and 10’’ x 14’’ x 6’’ for the control panel.
CC4-VS 4″ Cold Cutter Variable Speed Package |
$ 5,540.00 |
CC7-VS 7″ Cold Cutter Variable Speed Package |
$ 6,250.00 |
CC4 Head Only |
$ 4,145.00 |
CC7 Head Only |
$ 4,855.00 |
CP-CCVS Control Panel Only |
$ 1,395.00 |
**Packages include air regulator, roll stand, and everything needed to run. Cutter head only does not.**
Cold Cutters CC4 Setup instructions, parts list and Technical drawings – click here
Cold Cutters CC7 Setup instructions, parts list and Technical drawings – click here